Protection for fiberglass, wood, aluminum, steel, and seals leaky seams. Also, protects rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks. 

Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding.

Seals and protects planks and sheeting on wooden hulls against water absorption and damage from marine parasites. Seals seams and rivets on aluminum hulls and acts as a barrier coat to minimize galvanic corrosion. Gluvit provides abrasion resistance to protect hull sides and bottoms from damage by grounding on beaches or rocks on jet skis, rowboats and canoes.

Gluvit must be painted after full cure. It can be overcoated with any marine paint or other coating compatible with epoxies. Make sure the coating being used is epoxy friendly and suitable for the application.

Available in 2 lb and 8 lb kits.  2 lb unit of Gluvit covers 25-35 square feet, when applied at 6-8 mils. An 8 lb unit covers 100-130 square feet.